Freedom Angel Pin
|
Supplies 1" x 1" Flesh Foamie #7761 3463 2.5" x1.5" White Foamie #7761 3612 1.5" x 1.75" Red Foamie #7761 3604 1.75" x 1.75" Blue Foamie #7761 3489 Black Fine Tip Sharpie Marker # 7753 1954 Red Fine Tip Sharpie Marker #7753 1939 3" of Silver wire 24 gauge #3003 3270 3" of Blue wire 24 gauge #3002 0895 3" of Red wire 24 gauge #3002 0892 1" Pin Back #7712 6987 or #7740 3337 Low Temp Glue Gun & Glue sticks |
|
|
Directions Trace and cut out pieces from foamie according to the patterns. Use the black Sharpie marker and make two "dot" eyes on the head. Make two heart cheeks below the eyes with the red Sharpie marker. Set aside. Position the white heart wings behind the top of the red dress. Glue in place. Place the head on top of the dress and glue in place. Twist the 3 colored wires together like a braid. To make the halo, form a loop with the wire and twist the ends together. Place the halo on the top of the head with the straight end behind. Glue in place. Use the black Sharpie marker to write "USA" on the blue star. Place the star onto the dress and glue in place.
Glue the pin back behind the angel's body. |
|
