Supplies:

2” x 3” Brown Foamie #7761 3521

¾” x 2 ½” Green Foamie #7761 3570

½” scrap Black Foamie for nose #7761 3620

½” x ½” Pink Foamie #7761 3596

Scraps of Foamie for flower

2 – 5mm Moving eyes #7766 0811

1/16” hole punch #7717 8533

¼” heart hole punch #7717 8632

Low Temp Glue Gun & Glue sticks

Directions:

Trace and cut out pieces from foamie according to the patterns.

Take the strip of green foamie and snip lengthwise along one side, stopping about ¼” from the other end. This will make your hula skirt. Wrap the skirt around the bottom of the bear’s body, fanning out and overlapping in the back. Glue overlapped edges together. Skirt should help bear stand up on its own.

Position arms above the waist of the skirt in a hula position. Glue in place. Position head over the tops of the arms and glue in place.

Position the moving eyes in the center of the head and glue in place. Punch two pink foamie hearts for the cheeks and glue below the eyes. Punch a black foamie nose with the 1/16” hole punch and glue in the center below the eyes.

Cut a small flower shape from foamie and glue by an ear.