Supplies

1 qty. 3” x 3 ½” Cocoa #30041092Foamie for body & arms

1 qty. 1 ½” x 2” Light Green Foamie #77613570for Shell

1 qty. ¾” x 2 ½” Xmas Green Foamie #77613554 for Shell rim

1 qty. 1” x 3” Xmas Green Foamie #77613554 for Shell design

2 qty. 5mm Moving Eye #30055154

1 qty. 1” pin back Gold #77403337 or silver #77126987 OR

1 qty. ¾” Button Magnet #77622688 Black Sharpie Marker #91029

Tools:

Pen/Pencil for tracing

Sharp Scissors

Low Temp Glue Gun & Glue sticks  

Diagram 1

Directions

Trace and cut out pieces from foamie according to the patterns.

Place the shell on the body, lining up the ends to match the curve of the body. Glue in place. Place the shell design pieces onto the shell, using the pictured sample for reference. Glue in place. Lay the shell rim along the bottom of the shell and glue in place. Place one arm on the body just below the neck and the other arm coming out from behind the body. Glue both in place.

Place the two moving eyes onto the head and glue in place. Use the black Sharpie marker to draw in a smile below the eyes. Glue a pin back or magnet behind the body.