|
Water Globe Critter |
|
|
Supplies: 4 Photo Water Ball #7719 4290 4 ½ x 5 Light Green Foamie #7761 3570 for the body 3 x 4 Light Green Foamie for the head 3 x 5 Light Green Foamie for legs 3 x 4 Light Green Foamie for arms 1 Ό x 2 ½ White #7761 3612 Foamie for eyes 1x 2 Black Foamie #7761 3620 for eyes 1 x 1 ½ Red Foamie #7761 3604 for heart cheeks 2 pcs. of 1 Ύx 2 3/8 cardstock of printed paper for message in globe Black Sharpie marker #91029 Low temp Glue gun & Glue Sticks
|
 |
|
Directions: Trace and cut out pieces form foamie according to the patterns.
Place the body piece around the water globe, with the inside curve hugging the curved surface of the globe. Carefully adhere the piece to the globe.
Place the black eyes in the center of the white eyes and glue in place. Place the eyes onto the frogs head as in the pictured sample. Glue in place. Use the black Sharpie marker to draw a smile on the lower half of the head. Place a heart cheek on either end of the smile and glue in place. Place the frogs head on the top edge of the body and glue in place.
Place a leg on either side of the bottom edge of the body and glue in place. Place an arm on either side of the body below the head and glue in place.
Use the black Sharpie to write U R Toad-ily Cool! or another message onto one of the papers. Remove the bottom base of the water globe and slip out the foam from the slot. Place the message and other paper on either side of the foam. Slip back into the globe with the message side facing front. Screw back the water globe base.
© 2006 Ben Franklin Crafts, Inc. |
|
